Brakes/Levers/Pads

Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension.

- High performance compounds recommended for all-conditions - Steel backing

The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy. - For rear use only

Double your braking options with Sunlite's Type 1 Top-Mount Cross Levers. They fit neatly on top of your bars and they're a great way to gain more control on technical cyclocross courses and everywhere else you choose to ride. They're made of aluminum and boast a built-in reach adjustment.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Origin-8's Pro Pulsion Cantilever Brake provides quality stopping power on a budget for cyclocross and touring bikes. It features forged aluminum construction and a spring tension adjuster for easy set up.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Origin-8's Cantilever MTB Levers are light and reliable forged-aluminum 4-finger levers for cantilever brakes and they're compatible with Shimano Rapid Fire and SRAM Grip Shift shifters. These fine levers include return springs for a snappy, smooth action, built-in reach adjustment and adjusting barrels for fine-tuning your brakes.

Origin-8 Classic Linear-Pull Brakes are a great upgrade or replacement brake for your ride. Available in both front and rear, they feature forged aluminum construction with dual hex screw tension adjustment for simple set-up.

- Truly universal compatibility (adjustable cable pull for linear/mech disc or caliper/cantilever) - 22.2mm (7/8") clamp - Return spring/reach adjustment - Forged alloy construction - 3-finger lever design - 206g pair

Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g

- Melt forged aluminum construction - Coiled spring tension adjust

The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options. - Fits 7/8" bars, has a hinged bracket, and does not include cable knarps

Origin-8's Power V-Type Levers are a great choice for linear-pull (also called "direct-pull" and "V-Brakes") and mechanical-disc brakes. They are made of light and tough forged aluminum with Kraton rubber inserts for improved control and comfort every time you hit your brakes. Plus they have built-in reach adjustment and barrel adjusters for easy brake fine-tuning, too.

Origin-8's X-tra Pro V-brake is the answer to all your braking needs. Specially designed to clear most fenders, this brake features a dual-spring linear tension adjustment to give you just the right amount of stopping power. Don't let your fenders get in the way of your stopping—Origin-8 has your solution. • Forged aluminum construction • 110mm length to clear fenders • Linear tension springs • Includes cartridge pads

Shimano A01S Resin Disc Brake Pads - Fits XTR BR-M975/966/965, Saint BR-M800, XT BR-M776/775/765, SLX BR-M665/601, Deore BR-M596/595/585/545/535, Road BR-R505, Alfine BR-S501/500, LX BR-T665/605 calipers - OEM resin pad for XT BR-M775 and SLX BR-M665 calipers - Resin pad with low noise and excellent power modulation - Backing Plate Material: Steel - Compound: Resin - Heat Sink: No - Pad Shape Number: 20

•Designed for cantilever & caliper brakes •Aluminum construction •2.5 finger •22.2mm (7/8") clamp •171g pair •SHIMANO Equivalent BL-R550 / BL-3500

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each

•Side pull brake •Includes lever, caliper, cable and housing •Forged aluminum construction •Includes replacement bolt for mounting on fork

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Kool-Stop has formulated a new compound with their Continental line of brake pads specifically for composite wheels. They have color matched and fine tuned the perfect compound for Skyway Tuff Wheels! Features: - Special "mag-friendly" compound works great on ALL composite mag wheels - Strongly suggest using the same color brake pad as the mag wheels that you will be using these on! - These are made just like "back in the day" with a small threaded post. Will fit all old-school style caliper brakes. May not work on all V-brakes, however! - Sold in pairs/ 2 pcs. - Rim friendly

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

- Extra-long molded pads for MTB linear brakes - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

The Supra 2 is an updated design of the original Supra. This is one of Kool-Stop's most popular rim pads and offers a thicker friction material for longer life. Features: - Hardened and plated reinforced steel backbone - Patented angled tip plow - Water grooves - Knurl-lock washer system - Self tow in - Available only in Threaded - Rim Friendly Compounds Compounds: - Salmon - Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Electric - Kool-Stop's E-Electric compound is formulated specifically for the higher speeds and weights of electric bicycles. - Clear - An extreme compound for only experienced trick or trails riders needing a compound that will instantly lock the wheels. - Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions. - Pink - Colored pads are a semi–aggressive compound that will give you good performance in all weather conditions. Specifications: - Weight per pair: 60.6 grams - Overall length: 66.5 mm - Pad contact width: 9.1 mm

With a stiff, one-piece, co-molded design, Box Three™ Air Flow Brake Shoes provide the excellent stopping power and are the perfect choice for your next build. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. Pivoting posts aid installation and make toe-in adjustments simple and easy.

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping